Welcome, Guest
Username: Password: Remember me
This is a public forum thread open to all users
  • Page:
  • 1

TOPIC: 34 datr

34 datr 11 months 3 weeks ago #40642

Does any one know what the bearings are for the two throttle shafts? The grey plastic seals seem available and some nylon bushes but I am not sure.
Also, a coincidence. My carburettor was sticking after lifting off resulting in a fast idle at lights. A blip would re set it. A friend down here in Cornwall had the same problem. I looked online and used ptfe spray around the shafts but also put redX in the petrol. it seems to be cured now. I am wondering if the ethanol in modern petrol could be to blame?

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.054 seconds