This is a public forum thread open to all users

What part is this and how can I source another!?

More
10 years 1 month ago #37278 by Mark
Hi All,

I am just trying to get my delightful red X19 1989 back on the road an in replacing the distributor rotor arm and points I found that when i removed this strange plastic securing arm it snapped and I have no idea where to source another from!




Sorry to be a bit of a tool but I have contacted eurosport, autosports and have had the same response - good luck!
It is from an S178 distributor - was this used on any other car? Again, I cant find anything online about it.

Any information on a replacement, who sells them or an alternative suggestion is most welcome.

So annoying as this part has basically grounded the poor car :(

Thanks
Mark

Please Log in or Create an account to join the conversation.

More
10 years 1 month ago #37280 by Speedy Fiat
What did it do? You might want to consider an electronic ignition conversion if you need and can't get a replacement. There are several very good conversions that fit into the original distributor e.g the 'Aldon Ignitor' (not sure they do one for an X1/9 set up). Much better spark management and no maintenance. You could just replace the distributor for one of another X1/9, I might have one lurking in the garage if interested

Please Log in or Create an account to join the conversation.

Time to create page: 0.110 seconds

Sorry, this website uses features that your browser doesn’t support. Upgrade to a newer version of Firefox, Chrome, Safari, or Edge and you’ll be all set.